This template contains the configuration for connecting to SwissIX. If you want to connect to the SwissIX's BGP route servers, there are a few requirements that must be met, which are included in this template. It is a text file that can be copied to the router via the CLI (console, SSH, Telnet, etc.).

Features

• Version 1.0
• Interface to SwissIX configuration
• Prefix list for IPv4 and IPv6
• Route policy for IPv4 and IPv6
• BGP configuration for IPv4 and IPv6

This template provides a typical basic configuration of a Huawei switch configured as a M-LAG cluster based on the YunShan operating system. You can use this as a basis for your devices and customize them according to your requirements. It is a text file that can be copied to the switch via CLI (console, SSH, telnet, etc.). 

Features

• Version 1.1
• Syslog and SNMP
• DNS
• M-LAG cluster configuration with master/slave
• M-LAG peer link configuration
• M-LAG etherchannel example
• Disable unnecessary services
• Timezone with daylight saving and NTP
• AAA with TACACS and local fallback
• Radius configuration for authentication
• Many more

This template provides a typical basic configuration of a Huawei WLAN Controller (AC) based on the VRP operating system. You can use this as a basis for your devices and customize them according to your requirements. It is a text file that can be copied to the WLAN AC via CLI (console, SSH, telnet, etc.). 

Features

• Syslog and SNMP
• DNS
• SSID PSK and via Radius
• AP group
• Automatic AP firmware upgrade
• Disable unnecessary services
• Timezone with daylight saving and NTP
• AAA with TACACS and local fallback
• Radius configuration for authentication
• Many more

This template provides a typical basic configuration of a Huawei BGP router based on the VRP operating system. You can use this as a basis for your devices and customize them according to your requirements. It is a text file that can be copied to the router via CLI (console, SSH, telnet, etc.). 

Features

• Syslog and SNMP
• DNS
• Automatic configuration backup to SFTP server
• Disable unnecessary services
• Timezone with daylight saving and NTP
• AAA with TACACS and local fallback
• BGP configuration with upstream provider
• IPv4 and IPv6
• Many more

Tested with

• NE20E-S2F

This template provides a typical basic configuration of a Huawei switch based on the YunShan operating system. You can use this as a basis for your devices and customize them according to your requirements. It is a text file that can be copied to the switch via CLI (console, SSH, telnet, etc.). 

Features

• Version 1.1
• Syslog and SNMP
• DNS
• Automatic configuration backup to SFTP server
• Disable unnecessary services
• Timezone with daylight saving and NTP
• DHCP snooping
• AAA with TACACS and local fallback
• LACP channel uplink
• Access port template
• Many more

Tested with

• S5735-L8P4X-QA-V2

This template provides a typical basic configuration of a Huawei switch based on the VRP operating system. You can use this as a basis for your devices and customize them according to your requirements. It is a text file that can be copied to the switch via CLI (console, SSH, telnet, etc.). 

Features

• Syslog and SNMP
• DNS
• Automatic configuration backup to FTP server
• Disable unnecessary services
• Timezone with daylight saving and NTP
• DHCP snooping
• AAA with TACACS and local fallback
• LACP channel uplink
• Access port template
• Many more

Tested with

• S5720-12TP-PWR-LI-AC