We have compiled a list of the most important Nokia ISAM 7360 CLI commands to support you in your daily work.
The following list contains a variety of helpful commands and their functions. For some commands, the numbering of the ports is important, which is structured as follows. This depends on the ISAM and ONT model and other factors (e.g., split factor). This example assumes a 4-slot chassis with 16 port PON linecard and a split factor of 1:64.
1/1/1/1/1/1/1
Rack (1)
Shelf (1)
Slot (1 to 4)
PON Port (1 to 16)
ONT Number (1 to 64)
ONT Ethernetport (physical 1)
ONT UNI Port (logical 1)
Display Configuration
The configuration can be displayed in the current context ('info' or 'info flat'), or the entire ISAM configuration can be displayed at once.
typ:isadmin>configure>system>syslog# infotyp:isadmin>configure>system>syslog# info flattyp:isadmin># admin display-config
Display MAC Address Table
Displays all the MAC addresses on the network and UNI site.
typ:isadmin># show service fdb-mac
Displays all the MAC addresses on the network and UNI site.
typ:isadmin># show vlan bridge-port-fdb
Display ONT Status
Displays detailed information about the ONT (serial number, admin/operational status, distance, signal level, etc.)
typ:isadmin># show equipment ont status pontyp:isadmin># show equipment ont opticstyp:isadmin># show equipment ont interface
Restart ONT
Restarts an unprovisioned ONT.
typ:isadmin># admin equipment ont sernum ALCL:XXXXXXXX reboot via-ploam
Restarts a provisioned ONT.
typ:isadmin># admin equipment ont interface 1/1/1/1/6 reboot with-active-image
Display Unprovisioned ONTs
Displays all ONTs with serial numbers that have not yet been provisioned.
typ:isadmin># show pon unprovision-onu
Display Interface Status
Displays the status of all interfaces (PON, ONT, UNI, etc.).
typ:isadmin># show interface port
Filter Output
Useful for filtering from a show command.
typ:isadmin># show vlan bridge-port-fdb | match exact:1/1/1/1/6/1/1
Display DHCP Snooping Table
Displays the DHCP snooping table per port and VLAN.
typ:isadmin># show dhcp-relay session
Display Linecard Status
Displays the status of the installed linecards.
typ:isadmin># show equipment slot
Display Transceiver Values
Displays the transceiver values.
typ:isadmin># show equipment diagnostics sfp nt-a:xfp:1 detail
Display Transceiver Inventory
Displays the respective transceiver model for all ports.
typ:isadmin># show equipment transceiver-inventory
Display Software Version
Displays the currently running software version.
typ:isadmin># show software-mngt version ansi
Save Configuration
Saves the configuration.
typ:isadmin># admin save
Live Troubleshooting
The following commands can be used for live troubleshooting of a connection. The interface statistics are displayed per VLAN.
typ:isadmin># configure trouble-shooting statistics interface 1/1/1/6/1/1/1typ:isadmin># show trouble-shooting statistics interface 1/1/1/6/1/1/1 user port vlan 31typ:isadmin># configure trouble-shooting statistics no interface 1/1/1/6/1/1/1
Port Statistics
The following commands are available to display statistics for the last 15 minutes or the last day.
typ:isadmin># show vlan current-15min-stats port 1/1/1/6/1/1/1 31 detailtyp:isadmin># show vlan previous-15min-stats port 1/1/1/6/1/1/1 31 detailtyp:isadmin># show vlan current-day-stats port 1/1/1/6/1/1/1 31 detailtyp:isadmin># show vlan port-curr-15min-stats 1/1/1/6/1/1/1 detailtyp:isadmin># show vlan port-15min-stats 1/1/1/6/1/1/1 detailtyp:isadmin># show vlan port-curr-day-stats 1/1/1/6/1/1/1 detail
Clear MAC Address
The following commands are available to display statistics for the last 15 minutes or the last day.
typ:isadmin># admin bridge learned-unicast-mac unicast-mac-address aa:bb:cc:dd:ee:ff vlan-port:1/1/1/1/6/1/1:31 deletetyp:isadmin># clear service id 31 fdb mac aa:bb:cc:dd:ee:ff
